Single-line centralized lubrication system

Save 95% of labor costs
Each lubrication unit works independently without interfering with each other, and the system has stable performance.
The system wiring is simple, the number of lubrication points can be easily expanded or reduced, and can be adjusted on site according to the oil volume and number of lubrication points.
The system needs to relieve pressure when the lubrication cycle is completed, and the patented technology of auxiliary unloading valve solves the problem of unloading viscous grease.
Easy to install, detect and maintain, the status of each lubrication point can be confirmed by the indicator rod on the distributor, and the working status of the system can be detected in real time by the sensor on the main pipeline.
Suitable for medium and small lubrication systems, widely used in wind power industry, construction machinery, commercial vehicles and other fields.
Single-line centralized lubrication system
Single-line centralized lubrication system
Introduction
Features And Benefits
Technical Parameters
Related Cases
Introduction
The single-line centralized lubrication system is mainly composed of lubrication pump, single-line distributor group , monitor, pipe harness and accessories. Lubricating grease is pumped out by the plunger pump and delivered to the single-line distributor through the main pipeline. The oil outlet on the side of the single-line distributor quantitatively delivers lubricating grease to each lubrication point of the bearing through the branch pipe, so as to ensure that all lubrication parts are well lubricated. The monitoring unit controls the operation of the lubrication pump and detects the operation status of the centralized lubrication system.
Features And Benefits
01 Lubrication Pump
ALPB series plunger lubrication pumps are driven by high-performance DC motors with internal turbine reducers, which can drive up to 4 pump elements. The pump body is made of die-cast aluminum, with stable and reliable performance. The grease tank is made of transparent material, which is convenient for oil level observation. The overall protection level of the plunger pump can reach meet the requirements of IP69.
02 Single line distributor
The single-line distributor is a quantitative oil supply device. The grease pumped by the lubrication pump is delivered to the distributor through the main pipeline. The grease exchange between the oil storage chamber and the oil pressure chamber inside the distributor is realized through the electromagnetic reversing valve, realizing the function of quantitative distribution of grease. The single-line distributor can achieve a combination of various oil ratios by replacing the outlet connector.
The distributor has a simple structure and high stability. Each lubrication point is independent of each other, and the blockage of any lubrication point will not affect the normal operation of the system.
03 Monitor
The monitor is the control center of the centralized lubrication system. It can dynamically display operating parameters such as system pressure, rest countdown, operation time, cumulative working times and fault codes. What is more, the monitor has functions such as low temperature protection, overload protection, low liquid level alarm and blockage alarm.
Technical Parameters
Plunger Pump Parameters
Product Picture
Model ALP80 series ALPB100 series ALPB120 ALPB132 ALPB140
Voltage DC24V DC24V DC24V DC24V DC24V
Output Flow 2.8 ml/min,4.0ml/min 2.8 ml/min,4.0ml/min 2.8 ml/min,4.0ml/min 2.8 ml/min,4.0ml/min 2.8 ml/min,4.0ml/min
Reservior 1L & 2L 2L & 4L 4L & 8L & 15L & 20L 20L & 30L 15L & 20L & 30L
Max Outlet Number 3 outlets 3 outlets 3 outlets 3 outlets 3 outlets
Operating Pressure 35 MPa 35 MPa 35 MPa 35 MPa 35 MPa
Applicable Grease Grease below NLGI-2 Grease below NLGI-2 Grease below NLGI-2 Grease below NLGI-2 Grease below NLGI-2
IP Grade IP65 IP65 IP65 IP65 IP65
Control Mode External/Internal Monitor External/Internal Monitor External/Internal Monitor External/Internal Monitor External/Internal Monitor
Operating Temperature T -40 °C~70°C T -40 °C~70°C T -40 °C~70°C T -40 °C~70°C T -40 °C~70°C
Distributor
Model /Parameters
Operating Temperature T -40 °C~70°C
Outlet Flow 0.1, 0.4& 0.6 mL/cy
Number of Outlets 6-16 outlets
Operating Pressure 25 MPa
Applicable Grease NLGI-0#,1#,2#
Inlet/outlet Thread M10 x 1
Zhengzhou Autol
Do You Need Advice, Inquiries Or Orders? We'd Love To Help You.
Related Cases
More Products
If You Still Can't Find The Answer On The Page, Please Leave Us A Message.
Fill Out Your Inquiry And We Will Get Back To You 24 H.
*All of your information will not be disclosed to third parties
X